10
J. Accessories
1. Sweep Hose Weight (Part #B-2)
If the sweep hose or the thrust jet tend to break
the surface of the water – squirting nearby win-
dows, pool decking, or innocent bystanders –
a sweep hose weight can be installed.
2. Ladder Guard Kit (Part #G-21)
The ladder guard kit will help prevent the Polaris
from getting hung up around the pool ladder
or handrails.
3. WaterStars (Part #7-400-00) and
WaterStars WF (Part #11-100-00)
Both of the Polaris WaterStars fountains come
equipped to connect to a universal wall fitting.
Once the Polaris 280 is installed with the uni-
versal wall fitting, you can quickly and easily
switch from pool cleaner to Polaris fountain
and back again.
4. Filter Bags
The Polaris comes with an all-purpose bag for
general use in all pools. You may want to pur-
chase one of our special bags listed below and
rotate between them as needed.
Sand/Silt Bag (Part #K-14)
The sand/silt bag is made of a mesh material
designed to trap very fine silt and dust. The bag
provides a secondary filtering system, removing
debris as small as 9/1000 of an inch.
Leaf Bag (Part #K-15)
The leaf bag is a large bag made of a more
durable material. It is specifically designed to
collect larger, heavier types of debris such as
large quantities of leaves and acorns.
Disposable Sand/Silt Bags (Part #G-45)
These bags are designed to be used in conjunc-
tion with any of the other bags. They are made of
an ultra fine material that will help catch even the
finest silt. They also make cleaning your bag
even easier. Sold in packages of four.
5. SpaWand (Part #5-100-00)
This simple, effective hand cleaning device
allows you to rapidly clean your spa and pool
steps without hoses or hook-ups. It’s also great
for fish ponds and other bodies of water.
To Next Page
Loading...
Need help?
General
