stream of all air inducing equipment.
Typical Installation
No. Part # Description Qty
1 P-5 Volute (Includes drain plug) 1
2 P-15 Impeller 1
3 P-55 Seal, Stainless Steel Cup/Spring 1
4 P-95 O-ring, Bracket 1
5P-10Bracket 1
6 P-35 Bolt, Stainless, Bracket to Motor 2
7 P-40 O-ring for Shaft 1
8 P-61 Motor, 3/4 HP, Threaded Shaft, 60 Hz 1
9 P-25 Bolt/Nut, Stainless for Volute to Bracket 6
10 P-80 Rubber Strip, Motor/Bracket 1
11 P-70 Pump Stand with Feet, Strip 1
12 P-75 Rubber Feet 4
13 P-65 Bolt, SS, Stand to Bracket and Motor 2
14 P-20 1/8" NPTM Plug, Plastic 1
15 P-17 Installation Kit with Quick Connects 1
and 6 Foot Hose
16 P-19 Pump Hose, 6 Foot, Flexible Reinforced 1
17 P-133 Softube
™
Quick Connect 4
PLEASE NOTE: All of the parts fit the PB3 Booster Pump produced in 1978 except P-20 and P-25.
Call 1-800-VAC-SWEEP (USA and Canada only) or (760) 599-9600 for more information on the Polaris Booster Pump.