35
FEATURES
Instrumentation
MFD Digital Disp lay Programs
History Program
The History Program automatically displays electrical system voltage
level and fuel level.
While in the History mode, press the S ET button to view maximum
vehicl e speed, maximum engine rpm or the current service interval
setting. The gauge automa tically logs the maximum spee d and engine
rpm even if the History Program is not curre ntly displayed.
The History Program will display the history of t he Maximum Speed,
Maximum RPM and Service Interval settings.
Maximum Speed/RPM Reset
While in either the MAX MPH or the
MAX RPM mode, press and hold t he
SET button for three seconds to reset
the recorded maximum values for both
MPH and RPM. Both of these values
are reset at the same time. R eset the
MAX MPH/RPM values before each
run to obtain accurate readings.
NOTE: Due to electrical noise, the
MFD may occasionally
display MAX MPH/RPM
values that are not
representative of actual
values.
To Next Page
Loading...
Need help?
General
