Polaris 9650iQ Sport User Manual

Page 28
English
6. Separate the lter canister from the lter support (6), as shown in Figure 24.
6
Figure 24. Remove Filter Canister
7. Empty all debris from the lter canister, then rinse the canister, the lter
support and the cleaner using a hose, as shown in Figure 25.
Figure 25. Wash Filter Canister
7
NOTE: Periodically, remove the filter canister and clean thoroughly with soapy water
and a soft bristle brush.
Store the Cleaner When Not in Use
The cleaner must be cleaned regularly using slightly soapy clean water. Do not use
solvents such as trichlorethylene or its equivalent. Rinse the cleaner generously
using clean water. Do not let your cleaner dry in direct sunlight near the pool. The
cleaner should be stored on its caddy so that it dries quickly.
1. Disconnect cleaner from the power source.
2. Starting at the cleaner head, remove all coils and tangles from the cable
(Figure 26). Lay the cable in the sun to loosen any tangling memory.
3. Place the rear wheels on the caddy and position the cleaner vertically on the
caddy base.

Polaris 9650iQ Sport Specifications

General

Pool Type	In-ground
Type	Robotic pool cleaner
Power Source	Electric
Warranty	2 years
Cable Length	70 ft
Smart Features	iAquaLink Control
Cleaning Time	3 hours

Summary

Important Safety Instructions

Prevent Electrical Shock

Instructions to reduce the risk of electrical shock when using the cleaner.

Prevent Child Injury and Drowning

Instructions to reduce the risk of injury and drowning related to pool equipment.

Connect to a Power Source

Prevent Electrical Shock

Warnings and guidelines for safe electrical connections to the power source.

General Cleaner Operation

Install and Submerge the Cleaner

Step-by-step guide on how to install and submerge the cleaner in the pool.

Installing iAquaLink™

Download the App

Instructions for downloading and opening the iAquaLink mobile application.

Configure the System

Guide to setting up the cleaner with your Wi-Fi network and smart device.

iAquaLink™ Control

Start / Stop Cleaning and Adjust Cleaning Time

Details on controlling the cleaner's operation and adjusting cycle times via the app.

Remote Control

Program or Cancel Recurring Cleaning Schedules

In-App Error Messages and Troubleshooting

Troubleshooting

Error Codes

Lists common error codes displayed on the control unit and their suggested solutions.

General Troubleshooting

A table of common user issues and their potential causes and solutions.

Dismissing an Error Code

iAquaLink™ Troubleshooting

How to connect

Common iAquaLink™ Troubleshooting

Troubleshooting common issues related to Wi-Fi connectivity and app status lights.