Polaris P935 Owner's Manual

Page 15
English
5 . 4 P r o gr a m m ing C le a ning C y c le s
You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1. Choose pool cleaning settings to program.
A ll m o d e ls:
Choose
to select either bottom of
pool or bottom plus sides of pool.
9 5 5 0 S p o r t / P 9 5 5 :
•Choose
to select waterline only in
addition to bottom or bottom plus sides options.
•Choose
to select intensive or
high intensity level cleaning.
•Choose
to select pool shape.
2. Press
to view currrent programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3. When the cleaning cycle you want to change
is displayed, press and hold for3to5
seconds.
Thedaysoftheweekashtwice.
N O T E: If the display flashes all zeros, the time has
not been set (new cleaner). Day and time must be set
before you can program cleaning times, see section
5.2 Changing the Clock Day and Time.
4. Press or buttons to cycle through
7 days of the week.
5. Press
to select.
Hour setting ashes twice.
6. Press or buttons to cycle
through 24 hours.
7. Press
to select.
Minutes setting ashes zero.
8. Press or buttons to cycle
throughfour15-minuteincrements(00,15,30,
or45).
10. Press
to select.
The next day to program ashes.
11. Press to program an additional cleaning
cycle for a different day O R
Press
to exit the programming menu
Days of the week are lit indicating programs
stored in the control unit memory for that day.
5 . 5 C a nc e ling C le a ning C y c le s
T o C a nc e l a n I nd iv id u a l P r o gr a m :
1. Press
andholdfor3to5seconds.
 Thedaysoftheweekashtwice.
2. Press
or buttons to cycle
through seven (7) days.
N O T E: If the day of the week flashes with no time
displayed, there is no program set for that day.

Polaris P935 Specifications

General

Brand	Polaris
Model	P935
Category	Swimming Pool Vacuum
Language	English