Polaris P935 Owner's Manual

Page 16
English
3. Press andholdfor3to5secondsto
delete programming for the selected day.
Press
to exit.
T o C a nc e l A ll P r o gr a m s:
1. Press
to make sure you have exited
the Programming Menu.
2. Press and hold
to delete all
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
S e c t io n 6 . C le a ning a nd
M a int e na nc e
W A R N I N G
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
6 . 1 C le a ning t he F ilt e r C a nist e r
Theltercanistershouldbecleanedattheendofeach
cycle.
1. Make sure the control unit cable is disconnected
fromtheelectricaloutletortheoatingcable
has been disconnected from the control unit.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. Toremovetheltercanisterassemblyfromthe
cleaner,followsteps5through8.
5. Pushthecoverlock(1)andliftthecover(2)
until it is secured in the vertical position.
(Figure 24).
2
1
F igu r e 2 4 . L if t C le a ne r C o v e r
6. Removetheltercanisterassemblyfromthe
body(3),asshowninFigure25.

Polaris P935 Specifications

General

Brand	Polaris
Model	P935
Category	Swimming Pool Vacuum
Language	English