1
INTRODUCTION
INTRODUCTION
SYMBOLS AND SIGNAL WORDS
This guide uses the following signal words and
symbols to emphasize particular information:
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
damage to vehicle and Track System components.
NOTE: Indicates supplementary information.
The Prohibition Safety Sign indicates an
action NOT to be taken in order to avoid a
hazard.
The Mandatory Action Sign indicates an
action that NEEDS to be taken to avoid a
hazard.
GENERAL INFORMATION
• All figures, information or photos presented in
this document are up to date at the time of
publication. However, they may change without
notice.
• Read and follow the indications contained in the
vehicle’s user manual and installation guidelines
carefully. Their content remain applicable after
installation of the System.
• This document should be read by everyone
operating the vehicle equipped with the System.
• This document is an integral part of the System.
Pass it along to any new owner of the System.
• Before usage, consult the legal authorities of the
area where you operate your vehicle equipped
with the System to ensure that all applicable
laws and regulations are observed.
• ATV and SxS Track Systems are designed to
reduce ground pressure and increase vehicle
traction. However, during normal operating
conditions, vehicle speed should be reduced
compared to a wheeled vehicle.
SERIAL NUMBER LOCATION
The following figures show the location of the serial
numbers on the Track System frame (Figure 1) and
rubber track (Figure 2).
Figure 1
Figure 2
WARNING
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
To Next Page
Loading...
Need help?
General
