2
SAFETY
SAFETY
WARNING STICKERS
You will find the warning stickers, shown in the
illustration below, affixed on the Track System
frames. Read the stickers carefully and understand
them before using the Track System. They contain
important information about safety and proper
operation of the System.
CAUTION: Do not remove the warning sticker from
the frame. If a sticker is damaged, have it replaced
at an authorized Polaris dealer.
GENERAL WARNING
User Manual - Users must read
the User Manual before attempting
to operate a vehicle equipped with
a Track System.
If the Track System is sold or in any
way transferred to a new user, the
User Manual must also be
transferred to the new user.
Moving Parts - Hands or fingers
caught between moving parts of the
equipment present a danger to life
or limb. Turn motor off before
servicing the Track System.
Maintenance Schedule
- Follow
instructions contained in the User
Manual’s Maintenance Schedule to
ensure safe and long lasting Track
System operation.
TENSIONER WARNING
TENSIONER BOLT WARNING - If track tension
adjustment is required, do not loosen the tensioner
assembly bolt under any circumstance. The bolt is
used to assemble and align the tensioner with the
frame. Tensioner re-alignment is necessary if this
bolt is loosened.
POSITION PICTOGRAM STICKERS
These stickers indicate the position of each Track
System unit: front left, front right, rear left and rear
right. They are located on the top of each frame.
Front left Front right
Rear left Rear right
To Next Page
Loading...
Need help?
General
