To Next Page

To Previous Page

❹ Maintenance

4.1 I Cleaning the ﬁ lter canister

• The cleaner's performance may be reduced if the ﬁ lter canister is full or dirty.

• Clean the ﬁ lter canister with clean water a er each cleaning cycle.

• Press the bu on to open the lid, see step ;

• Li the handle to remove the ﬁ lter canisters, see step ;

• Remove the ﬁ lter canisters by pressing the push bu on, see step ;

• Separate the ﬁ ne debris ﬁ lter canister from the all-purpose ﬁ lter canister, see step ;

• Remove the debris and rinse the ﬁ lter canisters with clean water, see step .

• If the ﬁ lter canister is clogged, clean it with an acidic solu on (spirit vinegar, for example). It is

recommended that you do this at least once a year, since the ﬁ lter canister will clog if not used for several

months (winterising period).

Polaris Quattro Instructions For Installation And Use

Other manuals for Polaris Quattro