To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my Polaris Utility Vehicle engine doesn't turn over?
If the engine of your Polaris Utility Vehicle doesn't turn over, recharge the battery to 12.8 VDC if the battery voltage is low. Check and tighten all battery and solenoid connections if they are loose. Also, inspect, clean, and reinstall the electronic control box connectors if they are loose.
How to prevent drive belt wear on my Polaris Utility Vehicle?
To prevent drive belt wear or burn on your Polaris Utility Vehicle, ensure sufficient warm-up, especially in low ambient temperatures, by warming the engine for at least 5 minutes. With the transmission in neutral, advance the throttle to about 1/8 in short bursts, 5 to 7 times. This will make the belt more flexible. Also, use the throttle quickly and effectively for proper clutch engagement. Install the recommended belt. Always warm up the belt by operating below 30 MPH (48 km/h) for one mile (1.5 km) and for 5 miles (8 km) or more when temperature is below freezing.
What to do if my Polaris Utility Vehicle drive belt is slipping?
If the drive belt on your Polaris Utility Vehicle is slipping because water or snow has entered the PVT system, dry out the PVT. If repeated leaking occurs, inspect the clutch seals for damage. Slippage can also occur from failure to warm up the belt.
Why is my Polaris Utility Vehicle drive belt wearing out so fast?
When operating your Polaris Utility Vehicle, avoid driving onto a pickup or tall trailer in high range and starting out going up a steep incline. Instead, use low range during loading and on steep inclines. Avoid driving at low RPM or ground speed (3-7 MPH/ 5-11 km/h); instead, drive at a higher speed or use low range more frequently. When hauling heavy cargo or pushing at low RPM/low ground speed, use low range only. For utility use or plowing, use low range only.
What to do if my Polaris Utility Vehicle is stuck and burning the drive belt?
If your Polaris Utility Vehicle is stuck in mud or snow, shift the transmission to low range and carefully use fast, aggressive throttle application to engage the clutch. Also, when climbing over large objects from a stopped position, shift the transmission to low range and carefully use fast, brief, aggressive throttle application to engage the clutch. Be careful, because excessive throttle may cause loss of control and vehicle overturn.
General| Brand | Polaris |
|---|---|
| Model | RANGER RZR XP 900 |
| Category | Utility Vehicle |
| Language | English |
Explains signal words like WARNING, CAUTION, NOTICE, and safety symbols.
Discusses vibration and noise measurement standards for machinery.
Warnings about vehicle modifications and their impact on safety and warranty.
Details on essential protective clothing and equipment for safe operation.
Key safety rules, age limits, and avoiding impairment.
Warnings on inspection, restraints, loads, terrain, and water hazards.
Identifies key components and their locations on the vehicle.
Describes switches, pedals, gear selector, and steering wheel operation.
Covers hood, access panels, cab nets, seat belts, ROPS, and AWD.
Explains the instrument cluster, indicators, modes, and diagnostic information.
Importance of break-in period and pre-ride inspections for vehicle health and safety.
Key practices for safe and responsible vehicle operation.
How to start, stop, brake, and park the vehicle.
Guides on passenger handling, terrain, and challenging conditions.
Explains emission control systems, noise, public land operation, and EMI.
Overview of periodic maintenance tasks and intervals.
Engine oil, filter, transmission, gearcase, and PVT system maintenance.
Cooling system, brakes, battery, fuses, and lighting system maintenance.
Guidelines for washing, polishing, storing, and transporting the vehicle.
Technical specifications for the RZR XP 900 model.
Technical specifications for the RZR XP 4 900 model.
Lists possible causes and solutions for drive belt issues.
Addresses problems with engine not turning over or failing to start.
Solutions for engine backfires, pings, knocks, and stalls.
Troubleshooting for engine stopping or losing power.
Details warranty coverage, exclusions, and registration requirements.
Instructions on how to get warranty service from a dealer.
Specific limited warranty for emissions-related components.
