Polaris RZR XP 1000 EPS High Lifter Edition User Manual

37
FEATURES AND CONTROLS
Brake Pedal
Depress the brake pedal to
slow or stop the vehicle.
Apply the brakes while
starting the engine.
Throttle Pedal
Push the pedal down to
increase engine speed.
Spring pressure returns the
pedal to the rest position
when released. Always
check that the throttle pedal
returns normally before
starting the engine.
Tip: If the throttle pedal and brake pedal are applied simultaneously, engine
power may be limited.
Rollover Protective Structure (ROPS)
The Rollover Protective Structure
(ROPS) on this vehicle meets
OSHA 1928.53 rollover
performance requirements. Always
have your authorized POLARIS
dealer thoroughly inspect the ROPS
if it ever becomes damaged in any
way.
No device can assure occupant
protection in the event of a rollover.
When used with seat belts and cab
nets or doors, the ROPS helps
prevent occupants from being
ejected from the vehicle. Always
follow all safe operating practices
outlined in this manual to avoid
vehicle rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
Throttle Pedal
Brake Pedal
ROPS Label
(on ROPS or on
passenger hip bar)

Polaris RZR XP 1000 EPS High Lifter Edition Specifications

General

Brand	Polaris
Model	RZR XP 1000 EPS High Lifter Edition
Category	Offroad Vehicle
Language	English