Polaris Trail Blazer 2004 User Manual

97
MAINTENANCE AND LUBRICATION
Recoil Housing
To prevent possible engine damage,
always drain the recoil housing (1) after
operatingtheATVinverywet
conditions. This should also be done
before storing the ATV.
Water will enter the recoil housing if
the starter handle is disengaged from
the rope guide when under water. The
recoil handle must be behind the heat
shield for it to seal properly.
The drain screw is locat ed at the bottom of the recoil housing. Use a
wrench to remove the screw. Be sure to reinstall the screw after
draining the housing.
1

Polaris Trail Blazer 2004 Specifications

General

Brand	Polaris
Model	Trail Blazer 2004
Category	Offroad Vehicle
Language	English