89
MAINTENANCE
Clutch System
Periodically inspect clutch sheaves for damage, wear or belt residue. To
maintain optimum performance, clean with non-oil based cleaners such
as isopropyl alcohol.
NOTICE: If you become aware of higher than normal clutch engagement or an
unusual vibration or shift pattern, see your dealer immediately. Do not
operate the machine until repairs have been made. All clutch mainte-
nance and repairs must be performed by an authorized Polaris dealer.
Any unauthorized modifications to clutches, such as adding or remov-
ing weights, will void the warranty.
The bushings in the weights and rollers of Polaris clutches are made
of a material that may be damaged if lubricated. Do not lubricate
clutch bushings.
Clutch Alignment Offset
Clutch alignment offset is important for maintaining optimum perfor-
mance. Please see your Polaris dealer if you experience a decrease in
performance.
Clutch Center Distance
See your Owner's Manual Supplement for recommended center distance
for your machine. If adjustment is necessary, see your dealer.
n Drive Belt Condition
Periodically check the condition and tension of the drive belt, and
always carry a spare. Inspect the belt for signs of excessive wear: frayed
edges, missing cogs, cracks and excessive looseness. Replace the belt if
any of these conditions exist. See Belt Troubleshooting on page 116.
Tip: A worn belt will continue to function, but will not deliver maximum perfor-
mance. Always carry a spare belt in case of an emergency.
For improved drive-away during extremely cold temperatures, remove
the belt and warm it to room temperature. Reinstall it before starting the
snowmobile.
To Next Page
Loading...
Need help?
General
