Polaris trailboss 04 User Manual

35
SAFETY
Safe Riding Gear
Always wear clothing suited to the type of riding. ATV riding requires
speci al protective clothing for comfort and to reduce the chance of
injury.
1. Helmet
Your helmet is the most important piece
of protective gear for safe riding. A
helmet can prevent a severe head injury.
Select an approved helmet that meets or
exceeds your state’s safety standards
and bears either the Department of
Transportation (DOT) label, the
American National Standards Institute
label (ANSI z90.1), or the Snell
Memorial F oundation l abel.
2. Eye Protection
Do not depend on sunglasses for proper
eye protection. A pair of goggles or a
helmet face shield offer the best
protection for your eyes. They should
be kept clean and be of shatterproof
design (bearing the markings z2.1 or
VESC 8).
3. Glo ves
Off-road style gloves with knuckle pads are the best for comfort and
protection.
4. Boots
The best footwear is a pair of strong over-the-cal f boots with heels, like
moto-cross boots.
5. Clothing
Always wear long sleeves and long pants to protect arms and legs.
Riding pants with kneepads and a jersey with shoulder pads provide
the best protection.
1
2
3
4
5

Polaris trailboss 04 Specifications

General

Brand	Polaris
Model	trailboss 04
Category	Offroad Vehicle
Language	English

Summary

Safety Guidelines for ATV Operation

Operator Safety Precautions

Comprehensive safety guidelines and warnings for operating the ATV.

Age Restrictions for ATV Use

Importance of ATV Safety Training

ATV Safety Decals and Riding Gear

Safety Decals and Locations

Identifies and explains safety decals placed on the ATV for user protection.

Essential Safe Riding Gear

ATV Features and Controls Overview

Electrical Switches and Controls

Throttle Lever Operation

Brake System Information

Information on checking brake fluid levels and system condition.

Fuel System Safety

Crucial safety precautions for handling gasoline and engine exhaust.

Automatic Transmission Gear Selector

Operating Your Polaris ATV

ATV Break-In Period Procedures

Procedures and importance of the initial break-in period for the new ATV engine.

Pre-Ride Inspection Checklist

A checklist for essential vehicle inspections before each use.

Starting the ATV Engine

Step-by-step guide for starting a cold or warm ATV engine.

Hauling Cargo Safely

Guidelines for safely distributing, securing, and transporting cargo.

Safe Driving Procedures

General procedures and techniques for safe ATV operation.

Making Turns Safely

Techniques for making smooth and safe turns, including body positioning.

Driving Uphill Safely

Guidelines for safe operation when traveling uphill, including weight transfer.

Driving Downhill Safely

Procedures for safe descent on hills, including weight transfer and braking.

Safe Driving in Reverse

Precautions and techniques for safe operation in reverse gear.

Maintenance and Lubrication Guide

Periodic Maintenance Schedule

A comprehensive schedule for regular inspection, adjustment, and lubrication.

Lubrication Recommendations

Details on recommended lubricants, methods, and frequencies for various components.

Brake System Maintenance

Tire Care and Replacement

Rear Drive Chain Slack Adjustment

Spark Plug Service

Vehicle Immersion Procedures

PVT System Maintenance

Battery Service

Transporting Your ATV

ATV Troubleshooting Guide

Drive Belt and Cover Problems

Engine Doesn't Turn Over

Engine Cranks, Fails to Start

Engine Pings or Knocks

Engine Backfires Troubleshooting

Engine Runs Irregularly or Stalls

Engine Stops or Loses Power