CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.4" full color LTPS-TFT LCD display to help you compose images,
playback recorded images/video clips or adjust menu settings.
1. Press the Power button to turn the power on.
2. Compose the image on the LCD display so that the main subject
is within the focus frame.
■ Pressing the ▲
T button zooms in on the subject, and enlarges the
subject on the LCD display.
3. Press the SHUTTER button to capture the image.
Using the Flash
The flash is designed to function automatically when lighting conditions permit the use of flash. The camera
has 3 flash modes: Flash Off, Auto Flash, and Always On. You can take an image using a desired flash
mode to suit your circumstances. The flash’s effective range is 35.4” ~ 59.1”(0.9m~1.5m) (in Normal mode).
The flash function is disabled if the camera is set to Macro mode.
1. Press the Power button to turn the power on.
2. Toggle until your desired flash mode appears on the LCD monitor.
3. Compose your scene and press the SHUTTER button
to capture the image.
The table below will help you to choose the appropriate flash mode:
Flash mode Description
Flash Off
Use this mode in the environment that the flash use is prohibited or under
the situation that the distance to the subject is too far away for the flash to
have any effect.
Auto Flash
The flash fires automatically according to suit the photographic conditions.
Always On
The flash will always fire regardless of the surrounding brightness.
Select this mode for recording images with high contrast (backlighting) and
deep shadows.
EN-16 Polaroid a930 Digital Camera User Guide
www.polaroid.com
To Next Page
Loading...
Need help?
General
