Connecting to a PictBridge Compliant Printer
Read this section if the model you purchased is included with the PictBridge functions.
If a printer that supports PictBridge is available, images can be printed by connecting
the
digital still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your
camera.
2. Connect the other end of the USB cable to the
USB port on the printer.
3. Select [Pictbridge] with the / buttons, and press
the SHUTTER button.
Printing images
When the camera is properly connected to a Pict-Bridge compliant
printer and set to [Pictbridge], the Pict-Bridge menu is displayed on
the monitor.
1. Select the item you want to configure with the
/ buttons, and press the SHUTTER button.
■ [Images]: Select whether you want to print specific image
or all images. You may also select printing number for specific
image.
■ [Size]: Select the desired paper size according to the printer
type.
■ [Layout]: Select the desired printing layout according to the
printer type.
■ [Print]: After all settings are configured, select this item to start
printing.
2. After you select [Images] in the previous step, and press the
SHUTTER button to enter its respective menu
.
Select
[Select
Images
], [All
Images
] with the / buttons, and press
the SHUTTER button.
■ [Select
Images
]: Select to print one specific image.
■ [All
Images
]: Select to print all images.
Polaroid a930 Digital Camera User Guide EN-39
www.polaroid.com
To Next Page
Loading...
Need help?
General
