• Using Long Shutter Speeds
This function enables you to control how long the shutter stays open.
The long shutter speeds can be used either for special effects or when
shooting in low lighting conditions. There are four options in Long
Shutter setting: 1 second, 2 seconds, 4 seconds and 8 seconds.
1. Turn on the camera and set the camera to
Capture mode.
2. Press the
button.
3. Press the up or down button to select the
Long Shutter option.
4. Press the right button to access the Long
Shutter submenu.
5. Use the up or down button to select the
speed you need.
6. Press the
button to conrm, or press
the
button to cancel.
To avoid blurry pictures, place the camera on a at, steady surface or
use a tripod. We recommend using a tripod to keep the camera steady.
NOTE:
Make sure to activate the Long Shutter function when the environment is too dark.
To Next Page
Loading...
Need help?
General
