Poly CCX 600 Quick Start Guide

b. Enter the Admin password you will already have set earlier, and click Submit.
▪ This should typically be 123, depending on what you entered when the phone was first booted up from
factory defaults.
▪ If you don't know the password and need to reset the phone to factory defaults, follow the instructions
below in Restore Factory Default Settings and then return to this Provisioning section to continue.
6. In the Settings menu, click Provisioning Server.
7. Click the + to expand the Provisioning Server section.
8. Set Server Type to HTTPS.
9. In Server Address, type or paste the following URL exactly as it is shown, below:
◦ pccfg.8x8.com/polycomuc/
10. Click Save, then click Yes to confirm your changes in the popup prompt. The phone should automatically reboot.
https://support.8x8.com/equipment-devices/phones/polycom/How_To_Manually_Provision_a_Poly_CCX_phone
Updated: Sat, 27 Aug 2022 04:29:10 GMT
Powered by
2

Poly CCX 600 Specifications

General

Brand	Poly
Model	CCX 600
Category	Telephone
Language	English