Poly Rove B2 Configuration Guide

This Configuration Guide is written as general guide on how to configure the Poly Rove B2
DECT Base Station phone model to work with PBXware 6.6.1.
Requirements
Identifying Device Model
To start and successfully complete the registration of the Poly Rove B2 device, you need to know
which device model to set up.
On the back of each Poly Rove device, there is model information that you should check.
Although various device models can have exactly the same requirements and installation
procedures, device models can also have significantly different requirements and installation
procedures, so that is why it is important to know the model you own which results in you
setting up the device successfully.
DECT IP Base Station Firmware
Make sure that the device is loaded with an appropriate firmware version, 8.0.2.
■
To find out the firmware version of your Poly Rove B2 device model, open a new browser
■
window and enter your device's IP address in order to access the device's web administration
interface login screen. Example: http://192.168.1.22.
Log in to the device's web administration interface with your username and password. Please
■
note that the factory default login details are as follows: username is admin and password is
admin.

Poly Rove B2 Specifications

General

Brand	Poly
Model	Rove B2
Category	Cordless Telephone
Language	English