Poly Rove B2 Configuration Guide

Log in to the phone's web administration interface with the username and password. Please
■
note that the factory default login details are as follows: username is admin and password is
admin.
Go to DECT Wireless.
■
Click on Handset Summary in the left navigation menu.
■
In IPEI filed enter IPEI number of handset you would like to register to the base station.
■
The IPEI number of handset can be found in handset INFO section.
Press Register Next button.
■
Handset will be randomly registered to the first available handset label.
If you would like to register the handset to be labeled as Handset 1, check the box and
click on REGISTER.
Press Menu button on your handset.
■
Go to Settings.
■
Click on Connectivity.
■
Click on Register.
■
Select Empty and enter 0000 as the access code.
■
NOTE: The default pin code is 0000.
If everything is done as described above, the handset should be registered and synchronized.
Auto Provisioning
This section describes how to set UAD settings, create the PBXware Extension, and register the
device using DHCP or Static IP address.
The following topics are covered:
UAD Settings
■
Creating an Extension
■
Registering a Device
■
UAD Settings

Poly Rove B2 Specifications

General

Brand	Poly
Model	Rove B2
Category	Cordless Telephone
Language	English