PolyScience 300 Series User Manual

www.cuisinetechnology.com 1211
PolyScience Vacuum Sealing Systems
Seal Button — This button is used to immediately begin sealing
using the last programmed Seal Time; it overrides any process
currently in progress and initiates sealing� If vacuuming is in process,
vacuuming will continue until the sealing process is complete� If
marinating is in process, sealing will be initiated (and no further
vacuum will be pulled)� Following the completion of the sealing
process, the remaining chamber vacuum will be released and
product can be removed� If Seal Time is set to 00, pressing the Seal
button has no effect on the process in progress�
Stop / Clear Button — Pressing this button after entering a
Marinate Time, Seal Time or Calibration value resets the Digital
Display to 00 and activates a single one-second audible signal�
Pressing it while a process is running immediately stops the process
and activates two one-second beeps; the chamber vacuum will be
released and bag sealing will be skipped or stopped�
Pressing the Stop / Clear button a second time resets the Digital
Display to 00; three one-second beeps also sound�
Preset Buttons — These buttons allow you to set, select and
run frequently used Vacuum Level, Marinate Time and Seal Time
combinations� Although the Presets are pre-programmed at the
factory, you can change them to meet your specic requirements.
The factory Presets are as follows:
Preset Vacuum Level Marinate Time
(minutes)
Seal Time
(seconds)
Maximum 00 03
Medium 00 03
Medium 27 00
When a Preset is selected, the blue LEDs associated with the
Preset’s programmed settings (Vacuum Level, Marinate Time and
Seal Time) light and the Preset ID appears on the Digital Display
for two seconds� The Marinate Time setting will then appear on the
Digital Display for two seconds followed by the Seal Time setting for
two seconds� The unit is ready for use when the Preset ID is steadily
displayed�
Digital Display — Displays the Marinate Time, Seal Time and
Calibration values as they are input� Time is entered in minutes or
seconds, depending on the function selected� It also displays the ID
of a selected preset as well as the duration or the time remaining
in a process as it is being run. It ashes 00 when the process is
complete�

PolyScience 300 Series Specifications

General

Brand	PolyScience
Model	300 Series
Category	Kitchen Appliances
Language	English