PolyScience 300 Series User Manual

www.cuisinetechnology.com 1413
PolyScience Vacuum Sealing Systems
1� Plug the power cord into a properly grounded electrical outlet�
2� Press � The unit will run through a brief (~6 seconds) start-up
sequence�
Your PolyScience 300 Series Chamber Vacuum Sealer is simple to
set up and operate�
!
DIGITAL DISPLAY & LED STATUS
The 300 Series Chamber Vacuum Sealer’s Digital Display and LEDs convey
operational information as process parameters are entered and processes run�
Event Vacuum
Level LED
Marinate
Time LED
Seal Time
LED
Digital Display
Power On Last selected
level LED
ashes for
two seconds
and then on
steady
Off Off 00 for two
seconds
Previous
Marinate Time
value for two
seconds
Previous Seal
Time value for
two seconds
00 steady until
Start or Preset
Button pressed
Set Vacuum
Level
Initially on
steady at last
selected level,
changes when
a different
level is
selected
Off Off 00
Set Marinate
Time
LED for last
selected level
on steady
On when
Function
button
pressed once
Off Current Marinate
Time setting
Set Seal Time LED for last
selected level
on steady
Off when
Function
button
pressed to
advance to
Seal Time
On when
Function
button
pressed to
advance
from
Marinate
Time to Seal
Time
Current Seal
Time setting
SET-UP
• The LED next to the last selected Vacuum Level will ash for two
seconds and then remain lit�
• 00 will appear on the digital display for two seconds�
• The last selected Marinate Time will appear on the display for two
seconds�
• The last selected Seal Time will appear on the display for two sec-
onds�
• 00 will be displayed steadily on the readout, indicating that the unit is
ready for use�
The 300 Series Chamber Vacuum Sealer’s presets allow you to
create and run frequently used Vacuum Level, Seal Time and
Marinate Time combinations� These are particularly convenient if
you usually use the same settings for processing large batches or
particular types of foods�
WARNING: Make sure that the electrical outlet is
the same voltage and frequency as your Chamber
Vacuum Sealer� The correct voltage and frequency
are indicated on a label on the rear of the unit� The
use of extension cords is not recommended�
IMPORTANT: If you intend to use a preset for use
with external canisters, you should not include a seal
step�
Electrical Power
Creating a Preset Program

PolyScience 300 Series Specifications

General

Brand	PolyScience
Model	300 Series
Category	Kitchen Appliances
Language	English