PolyScience MX07R-20 User Manual

110-509 PSC/EN
11
Quick-Start
Unless otherwise specified, quick-start instructions apply to all models.
See Installation & Startup for additional information.
1
Fill reservoir with fluid
2
Connect all power cords and
control cables
3
Turn Power Switch / Circuit
Breaker ON
(Refrigerating/Heating Baths
only)
Maximum: 1 in / 2.54 cm
below the underside of the
top deck
Minimum: 2.6 in. / 6.7 cm
below the underside of the
top deck
Heat only Circulators
IEC Power Cord
(Temperature
Controller to
Refrigeration
Power Module
Refrigeration
Control Cable
(Temperature
Controller to
Refrigeration
Power
Module)
IEC Power
Cord to Mains
Refrigerated
Circulators
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

PolyScience MX07R-20 Specifications

General

Brand	PolyScience
Model	MX07R-20
Category	Laboratory Equipment
Language	English