IMPORTANT- you must fully charge the battery before
using the trolley. Always recharge the battery within 24
hours of use. Failure to do so could reduce the life of
the battery. See the Battery Care section, for detailed
instructions.
Your PowaKaddy trolley features an innovative
Plug’n’Play™ battery system including sprung terminals
and a locking feature to maintain power connection over
uneven terrain. Once your battery is charged and trolley
assembled, connect your battery as shown.
1. Engage the front of the battery.
2. Press the rear until the battery clips into position.
3. Press the Power button to turn the trolley on.
To remove the battery, rst turn o via the power button.
Pull the grey latch to disengage the battery before lifting
from the frame.
Note: The Lithium battery can be stored within the tray
for transportation. Please ensure you turn o the battery
using the power button. Leaving your battery on with
the Green LED illuminated could lead to your battery
discharging or trolley activating during transportation.
To modify the straight line running of the trolley :
1. Release the front wheel lever.
2. Rotate the adjustment wheel up to make your trolley
track more to the LEFT.
3. Rotate the adjustment wheel down to track more to
the RIGHT.
4. Once you are happy the trolley is running straight re-
apply the lever to lock in position.
Front Wheel Adjust
Lithium Battery
Page 5
To Next Page
Loading...
Need help?
General
