The handle height is pre-set to suit most users but can be
adjusted to one of ve positions. To adjust:
1. With the trolley fully open, remove the locking bolt
from the height adjust plate using the 4mm hex key
supplied in your manual pack.
2. Raise or lower the handle to the new desired position.
3. Tighten the bolt back up ensuring the adjustment
plates on both sides are locked into the mating
features.
Your trolley is fully compatible with PowaKaddy’s
innovative, magnetic bag lock system. Quickly and
eortlessly attach the bag to the trolley without the need
for a lower strap.
The Mag-Lok
®
is provided with all new compatible
PowaKaddy Cart Bags. Remove the Mag-Lok
®
from the tag
and then assemble onto the front bag stay using the screw
and 3mm hex key provided.
Don’t have a compatible PowaKaddy Cart Bag?
The trolley will still work with most cart bags using the Key-
Lok™ system - simply attached the front strap (provided
in the carton) by clicking it into place on each side of the
lower bagstay.
Mag-Lok
®
Handle Height Adjust
Page 6
Mag-Lok
®
, fastener & hex key are
provide with the Cart Bag