Section 1: Getting Started
THANK YOU…
...for choosing an LX3000 Color Label Printer. The LX3000 Printer will print razor-sharp
text and barcodes, vibrant colors, and even stunning photo-realistic photographs
directly onto rolls of labels, card stock and a variety of other approved media.
This User's Manual is your complete step-by-step guide to quickly and easily setting up
and printing with your new Color Label Printer!
1A. Choosing a Good Location
• Place the Printer on a flat surface in a location with adequate air circulation to
prevent internal heat build up.
• Do not place the Printer near heat sources such as radiators or air ducts, or in a
place subject to direct sun light, excessive dust, mechanical vibration or shock.
• Allow for adequate clearance in front of the Printer to accommodate the printed
label stock as it is leaving the Printer to avoid the possibility of binding or jamming
of the label stock.
• Allow for adequate overhead and left side clearance for opening the top cover to
allow easy access to the label stock and ink cartridge. The Printer will require 9.5
inches (24 cm) of additional space on the left side to completely open the cover
(Total = 26.75" or 68 cm). The Printer will require an additional 15.9 inches (40.4
cm) of overhead space to open the cover (Total = 25" or 63.5 cm).
To Next Page
Loading...
Need help?
General
