ProMed IT-6 - Getting Started; About this device; LCD-Display-section

DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
gettIng started
About this device
A. Output socket for channel 1
B. Output socket for channel 2
C. ON/OFF-Switch
D. Intensity control for channel 1
E. Intensity control for channel 2
F. LCD Display
G. “P” Programme selector button
H. “S“ key for the selection of the setting/programme modes
I. “ ▲” Improving the programme parameter
J. “ ▼” Decreasing the programme parameter
K. Belt clip
L. Battery case
LCD-Display-section:
1. Therapy programme
2. Display of the programme type
3. Pulse frequency display
4. Pulse width display
5. Pause display
6. Start of the therapy
7. Intensity of channel 2
8. Locking status flag
9. Display for working hours / idle time / Ramp time
10. Battery status display
11. Intensity of channel 1
12. Therapy duration
13. Output wave form (Synchronous (SY) / Alternating(AL)
25