ProSum PROATM-V155F User Manual

Testing the Adapter 15
6. Testing the Adapter
We recommend you carry out a test of the adapter after repairs and each time you suspect a problem. The
PROATM diagnostic utility permits to verify the correct working of the adapter and its hardware
compatibility with the computer. It does NOT permit to run a loop test.
proatm.exe runs on DOS only. The simplest way for launching this test is to boot your computer on the
PROATM CDROM. Then type “proatm” at the console prompt (FreeDOS).
proatm.exe helps differentiate hardware defaults from software or configuration problems.
The main window gives the characteristics of the adapter(s) detected in the computer (Figure 3).
Figure 3: proatm.exe Main Window

ProSum PROATM-V155F Specifications

General

Brand	ProSum
Model	PROATM-V155F
Category	PCI Card
Language	English