Installing the Adapter on Windows 2000/XP 9
Check the TCP/IP Protocol box.
Assigning the IP address to the computer:
Select Internet Protocol (TCP/IP) on the ATM Connection Properties page and click Properties.
In the TCP/IP Properties dialog box, click Use the following IP Address, and then enter the appropriate
information in the IP Address, Subnet Mask, and Default Gateway fields.
Configuring the ATMARP Client for PVC's only:
Select ATM Call Manager on the ATM Connection Properties page and click Properties.
Click Properties from the ATM Call Manager dialog box.
In the ATM PVC Configuration dialog box, enter the PVC name, VPI and VCI numbers, and then set the
Application Type to ATM ARP.
To Next Page
Loading...
General