HOW TO PREVENT FLY AWAYS
To prevent “y-away” situations (where drones seem to y away out of con-
trol) it is important to rst test and practice within close range before letting
the drone y too far away.
Each drone is designed land if the radio signal is lost. (But, this should not
be considered a landing procedure or normal ight practice.) It is important
to know and test the range of your drone before ying. We recommend
turning on and syncing the drone and walking away while testing the
engines. Keep walking and testing until it is obvious when you reach the
point where the signal is not controlling the drone. This will be the control
limit for the conditions in which you are ying. Distance does vary some-
what based on environmental and weather conditions, so testing the limit is
advised. Fly in a range that is good for easy visual operation of the drone.
IF YOU CAN’T SEE YOUR DRONE, THEN YOU CAN’T CONTROL YOUR
DRONE.
* Fly-aways are not covered by warranty as they are overwhelmingly
caused by pilot error.
To Next Page
Need help?
General
