Pullman M7P User Manual

PREPARING THE APPLIANCE
Assembling the hoses
- Insert, as far as possible, the sleeve (1 Fig. 1)
of the suction hose into the nozzle (2 Fig. 1) on
the drum.
- To release the sleeve (1 Fig. 2) move the lever (3
Fig. 2) clockwise then pull the sleeve outwards
(1 Fig. 2).
- Connect the (4 Fig. 3) detergent delivery hose
to the quick coupling (5 Fig.3); to release it push
the quick coupling (5 Fig.3) inwards.
- Connect the detergent suction (6 Fig. 4) hose to
the quick coupling (7 Fig.4); to release it push
the quick coupling (7 Fig.4) inwards.
Rigid pipe assembly for washing
carpets or floors (if present)
After connecting the suction hose to the outlet
the drum, do as follows:
- Make sure the lever (8 Fig.5) is in vertical
position then attach the first extension (10 Fig.5)
to the ergonomic handle (9 Fig.5) of the flexible
hose and lock it in place by turning the lever (8
Fig.5) to the horizontal position.
- Attach the first extension (10 Fig. 6) to the
second extension (11 Fig.6) and lock it in
place using the lever (12 Fig.6) as described
previously for the first extension.
- Attach the floor nozzle (13 Fig.7) to the second
extension (11 Fig.7) and lock it in place using
the lever (14 Fig.7) as described above.
Hose assembly for fabric washing (if
present)
After connecting the suction hose to the outlet
the drum, do as follows:
- Make sure the lever (8 Fig.8) is in vertical
position then attach the fabric nozzle (15 Fig.8)
to the ergonomic handle (9 Fig.8) and lock it
in place by turning the lever (8 Fig.8) to the
horizontal position.
Professional hose assembly for fabric
washing (if present)
After connecting the suction hose to the outlet
the drum, do as follows:
- Insert the fabric nozzle (16 Fig.9) into the flexible
hose (17 Fig.9).
- Connect the detergent hose (18 Fig.9) to the
quick coupling (19 Fig.9) on the flexible hose;
to release it push the quick coupling (19 Fig.9)
towards the hose.
Filling the detergent tank
- Remove the cap (20 Fig.10) and pour the
detergent liquid (suitable for the surfaces to be
washed) into the tank (21 Fig.10) .
NOTE: For detergent dosing refer to the
manufacturer’s instructions.
- Put the cap back on (20 Fig.10)
8

Pullman M7P Specifications

General

Brand	Pullman
Model	M7P
Category	Ventilation Hood
Language	English