Pulsar NX11 User Manual

21
English
20
English
TIMER OPERATION
Starting from 3 seconds before the set time is up, the timer beeps for 10
seconds. To stop the beep manually while sounding, press any of the buttons.
C
D
Start/Stop/Restart
Reset
C
Press to start or stop the timer.
Pressing button C will alternately start
or stop the timer.
D
Press to reset.
A
Remember to reset the timer time by
pressing button D for next use.
TIMER MODE
● The timer can be set up to 9 hours and 59 minutes in 1-minute increments.
● When the set time is up, it beeps for 10 seconds.
A
Press twice to show TIMER mode.
A
Press and hold for 2 to 3 seconds
to show TIMER SETTING display.
B
Press to select the item to be
adjusted (flashing).
Press to set the flashing digits.*
A
Press to confirm the timer setting.
TIMER SETTING
C D
or
A
D
C
B
TIMER mode mark
Hour
Minute
* If the timer time is set for “0:00,” the timer does not function.
Hour Minute
➾
➾

Pulsar NX11 Specifications

General

Brand	Pulsar
Model	NX11
Category	Watch
Language	English