Qlogic 5800V Series Installation Guide

4–Diagnostics/Troubleshooting
Recovering a Switch Using Maintenance Mode
59265-02 B 4-13
Recovering a Switch Using Maintenance Mode
A switch can become inoperable or unmanageable for the following reasons:
 Corrupt firmware
 Lost IP address
 Corrupt switch configuration
 Forgotten password
In these specific cases, you can recover the switch using maintenance mode.
Maintenance mode temporarily returns the switch IP address to 10.0.0.1, and
provides access to the following menu options:
 Exiting the Maintenance Menu (Option 0)
 Unpacking a Firmware Image File in Maintenance Mode (Option 1)
 Resetting the Network Configuration in Maintenance Mode (Option 2)
 Resetting User Accounts in Maintenance Mode (Option 3)
 Copying Log Files in Maintenance Mode (Option 4)
 Removing the Switch Configuration in Maintenance Mode (Option 5)
 Remaking the File System in Maintenance Mode (Option 6)
 Resetting the Switch in Maintenance Mode (Option 7)
 Updating the Boot Loader in Maintenance Mode (Option 8)
To recover a switch:
1. Place the switch in maintenance mode by pressing and holding the
Maintenance button with a pointed tool until only the Heartbeat LED is lit,
and then release the button.
The Heartbeat LED remains lit when the switch is in maintenance mode.
2. Establish a Telnet session with the switch using the maintenance mode IP
address 10.0.0.1.
3. Type the maintenance mode account name (prom) and password (prom).
Switch login: prom
Password:xxxx

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English