Qlogic 5800V Series Installation Guide

59265-02 B ix
Preface
This guide describes the features and installation of the QLogic
®
5800V Series
Stackable Fibre Channel switch, firmware version 8.0. The QLogic 5800V Series
switch is a 24-port, 8Gbps Fibre Channel switch. The model 5802V switch has
dual, replaceable power supplies; the model 5800V switch has a single,
non-replaceable power supply.
This guide is organized as follows:
 Section 1 is an overview of the switch. It describes indicator LEDs, all user
controls, and connections.
 Section 2 describes the factors to consider when planning a fabric.
 Section 3 explains how to install and configure the switch.
 Section 4 describes the diagnostic methods and troubleshooting
procedures.
 Section 5 describes the removal and replacement of field replaceable units:
media transceivers and power supplies.
 Appendix A lists the switch specifications.
Read the communications statements and laser safety information later in this
section.
Intended Audience
This manual introduces users to the switch and explains its installation and
service. It is intended for users who are responsible for installing and servicing
network equipment.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English