QNAP TS-1635AX User Manual

4. Basic Operations
This chapter describes basic NAS operations.
Power Button
Operation User Action Result
Power on Press the button once. The NAS powers on.
Power off Press and hold the button for 1.5
seconds.
The NAS powers off.
Force power off Press and hold the button for 5
seconds.
The NAS shuts down.
Important
Use this method only
when the NAS is
unresponsive.
Reset Button
Operation User Action Result
Basic system reset Press and hold the
button for 3 seconds.
The following settings are reset to default:
• System administrator password: admin
• TCP/IP configuration:
• Obtain IP address settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-LAN models
only), the port trunking mode is reset to “Active
Backup (Failover)”.
• System port: 8080 (system service port)
• Security level: Low (Allow all connections)
• LCD panel password: (blank)
• VLAN: Disabled
Advanced system
reset
Press and hold the
button for 15 seconds.
The default factory settings are restored.
• To retrieve old data after an advanced system reset,
recreate the previous folder structure on the NAS.
USB One Touch Copy Button
The USB One Touch Copy button allows you to copy data backups from a USB device to the NAS or from
the NAS to a USB device.
This feature supports incremental backups. The NAS only copies files that were modified or added after the
last backup.
TS-1635AX User Guide
Basic Operations 36

QNAP TS-1635AX Specifications

General

Internal memory	4 GB
Internal memory type	DDR4
Maximum RAM supported	16 GB
RAID levels	0, 1, 5, 6, 10, 60, JBOD
RAID support	Yes
Storage drive size	- \
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, exFAT, ext3, ext4
Storage drive interface	-
Storage drives installed	No
Number of M.2 (M & B) slots	2
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	16
Supported storage drive interfaces	Serial ATA, Serial ATA II, Serial ATA III
Ethernet LAN data rates	10, 100, 1000, 10000 Mbit/s
Ethernet LAN data rate supported (max)	10000 Mbit/s
Fiber optic connector	SFP+
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Processor cores	4
Processor family	Marvell
Processor frequency	1.6 GHz
Processor architecture	ARM Cortex-A7
PCI Express slots version	3.0
Chassis type	Desktop
Cooling type	Active
Display type	LCD
Fan diameter	92 mm
Product color	Black
Fan diameter 2	60 mm
Number of fans	4 fan(s)
Cable lock slot type	Kensington
Number of built-in speakers	1
Type	NAS
Noise level	23 dB
Device class	Small & Medium Business
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari 7, Google Chrome, Microsoft Internet Explorer 10, Mozilla Firefox
Security algorithms	256-bit AES
Fan voltage	12 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply unit (PSU) capacity	250 W
Storage temperature (T-T)	5 - 95 °C
Operating temperature (T-T)	0 - 40 °C
Operating system version	4.3.4
Operating system installed	QNAP Turbo System
Cables included	AC, LAN (RJ-45)

Weight and Dimensions

Depth	319.8 mm
Width	369.89 mm
Height	303.84 mm