quadient 200 Series User Manual

2
200 Series Conveyor Operator Manual Issue 1 May 2011
1 Introduction
With this conveyor you have an ouput device intended for use with a 200 Series folder/
inserter. It provides a means of receiving lled envelopes prior to hand removal for
subsequent further handling. Its speed of operation and jog steps between batches are
under software control by the inserter.
In order to ensure the long usage of this machine and its components, and above all the
safe use of the machine, you must read and adhere to the operating instructions and safety
notes. Always be aware of all warnings and notes that are mounted or noted on the machine
itself.
All persons entrusted with the handling of this machine must also be familiar with the
operating manual.
Save this handbook carefully, so that the information it contains may be available at all
times.
1.1 Pictograms
General Warnings
Warning of danger from electricity or electrical shock
Information / Note indicating important information regarding the handling of
the machine.

quadient 200 Series Specifications

General

Brand	quadient
Model	200 Series
Category	Postal Equipment
Language	English

Summary

Introduction

Pictograms

Explanation of warning symbols and information icons used in the manual.

Handbook Usage Guidelines

Instructions on how to read and use the handbook for effective operation and reference.

Safety Notes

General Safety Precautions

Covers installation, electrical hazards, operating safety, and cleaning procedures.

End of Life Procedures

Guidance on proper disposal and environmental considerations for the equipment.

Description of Machine

Operational Overview

Details the conveyor's role in receiving and stacking mailpieces from an inserter.

Identification of Parts

Identifies key components of the conveyor system.

Angled (Default) Version Identification

Diagram and labels for the Angled (Default) conveyor configuration.

Inline Version Identification

Diagram and labels for the Inline conveyor configuration.

Machine Setup

Angled Version Setup

Adjusting the backstop and roller plate for the Angled conveyor version.

Inline Version Setup

Adjusting rollers and roller plate for the Inline conveyor version.

Backrest Adjustment

Adjusting the backrest tilt for stacking envelopes at the end of the conveyor.

Using the Conveyor

Output Settings Configuration

Defining batch settings, pause times, and jog steps for conveyor operation.

Adjusting Conveyor Speed

Modifying conveyor speed using the Fine Tuning settings and Conveyor Pulse Multiplier.

Technical Specification

Physical Dimensions and Speed

Specifications for overall sizes, length, width, height, and maximum linear speed.

Electrical Ratings

Information on voltage, power consumption, and fuse for the conveyor.

Troubleshooting Guide