7
200 Series Conveyor Operator Manual Issue 1 May 2011
3 Description of machine
3.1 Description of operation
The function of the machine is to receive mailpieces from a 200 Series in-
serter and stack them along the surface for hand removal.
The speed of the conveyor can be adjusted in the operating software for the
relevant job, and batches can be ‘jogged’ to provide a gap between each
batch.
The conveyor can be attached to the inserter in two orientations:
At a right angle to the inserter in the direction of the operator
•
(default orientation).
In line with the inserter.•
The Output Conveyor is automatic in operation and no external controls are
required.
To Next Page
Loading...
Need help?
General
