Quantum Scalar i80 Quick Start Guide

12 Installing and Configuring the SKM VMware Servers
Quantum Scalar Key Manager 2.5 Quick Start Guide
Allow 30 minutes per server to complete the configuration.
1 Using vSphere Client, make sure the SKM VM server you just created is powered OFF
(right-click the VM server, select Power, then select Power Off).
2 Right-click the SKM VM server and select Edit Settings.
3 Configure the MAC address as follows (see Figure 5):
a Under the Hardware tab, select Network adapter 1.
b Under MAC Address, select Manual.
c In the MAC Address field, type the MAC ID from the label attached to the CD
case of the CD from which you deployed the .ova image.
d Click OK.
Figure 5 Configuring the MAC
Address (Example)
4 Configure the video memory as follows:
a Right-click the SKM VM server and select Edit Settings.
b Under the Hardware tab, select Video card (see Figure 6).
c On the right side of the screen, under Enter total video RAM, change the
setting to 3 MB.
d Click OK.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g