Queclink GL300 User Guide

GL300 Manage Tool User Guide
TRACGL300MT001 - 24 -
3.2.6 Set the parameters of Protocol Watchdog
Step_1: Select “Protocol Watchdog”, after that the parameters of GTDOG show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them
Step_4: Set the Protocol Watchdog parameters. Please refer to “GL300 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTDOG to GL300.
Step_1
Step_2
Step_3
Step_5
Step_4
Queclink
Confidential

Queclink GL300 Specifications

General

Brand	Queclink
Model	GL300
Category	GPS
Language	English