Queclink GL300 User Guide

GL300 Manage Tool User Guide
TRACGL300MT001 - 39 -
3.2.21 Set the parameters of Temperature Alarm
Step_1: Select “Temperature Alarm”, after that the parameters of GTTEM show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300 through
SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them.
Step_4: Set the Temperature Alarm parameters. Please refer to “GL300 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTTEM to GL300
Step_1
Step_2
Step_4
Step_3
Step_5
Queclink
Confidential

Queclink GL300 Specifications

General

Brand	Queclink
Model	GL300
Category	GPS
Language	English