GL300 User Manual
TRACGL300UM001 - 11 -
3.5. Turn on/Turn off
Turn on:
Method 1: Press the Power key at least 3 seconds and release it to turn on GL300. At
the same time,
PWR LED will light on.
Method 2: Connect device to charger or external battery, and it will turn on
automatically,
PWR LED will light on.
Turn off:
Method 1: Press the power key about 2 seconds; PWR LED will fast flash and then turn
off, it indicates that GL300 is turned off. The time of power off is depended on the
quality of network. The maximum time of power off is 90 seconds. It is only valid to
turn off when using internal battery. Please note the end-user can not power off GL300
when the power key is disabled by protocol.
Method 2: If using external battery, device will power turn-off when external battery
disconnect.