LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual 13 / 29
Parameter
2.1.7. AT+QGPSCFG="gsvextnmeatype" Enable/Disable Output of GSVEXT NMEA
Sentences
Parameter
<beidounmeatype> Configure output type of BeiDou NMEA sentences via ORed, and the
configuration parameter will be automatically saved to NVRAM. The default
value is 0.
0 Disable
1 GSA
2 GSV
<errcode> Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to Chapter 4 for details.
AT+QGPSCFG="gsvextnmeatype" Enable/Disable Output of GSVEXT NMEA
Sentences
Write Command
AT+QGPSCFG="gsvextnmeatype"[,<
gsvextnmeatype>]
Response
When there are two parameters:
OK
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "gsvextnmeatype",<gsvextnmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
<gsvextnmeatype> Enable/disable output of extended GSV information. Elevation/Azimuth/SNR
(C/No) will be displayed as decimals when extended information is enabled,
otherwise they will be displayed as integers. The configuration parameter will
be automatically saved to NVRAM. The default value is 0.
0 Disable
1 Enable
<errcode> Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to Chapter 4 for details.
To Next Page
Loading...
Need help?
General
