13
Wall Switch Sleep Mode
• If no button press is detected for 10 seconds, the Wall Switch will enter sleep mode.
Pressing either button will wake the switch and display the current status.
• In Sleep Mode, all LED indicators will be off.
LED Status Indicators of Wall Switch
• If all LED indicators on the Wall Switch come on after three seconds of pressing one of
the buttons, this means the Wall Switch is failing to connect to the Hub. You will need to
move the switch closer to the Hub to ensure proper communication.
• If all the Timer LED indicators are off and one of the Speed LED indicators are on, this
means you have not set the time for the fan to run and the fan will not operate. Simply
press the Timer button to turn the fan on and set the fan runtime.
• If only one of the Timer LED indicators is on and only one of the Speed LED indicators is
on, the fan is running at the indicated speed and timer level.
• If all the Timer LED indicators are on and only one of the Speed LED indicators are on, the
fan is running in Continuous On mode at the indicated speed level. The fan will continue to
run until you press the Timer button to turn it off.
Notes on Operation
• In order for the fan to run, a Timer selection MUST be made. When the Timer status is off
(no LED indicators lit), you can still change the Speed setting. The Speed setting will take
effect once the Timer selection is made.
3-2 Frequently Asked Questions
What does RF Mean?
“RF” Stands for Radio Frequency.
How does RF Work?
A small electronic device is used to transmit and/or receive radio signals between two devices.
In an embedded system, it often communicates with another device wirelessly. This wireless
communication may be accomplished through optical communication or through radio
frequency (RF) communication.
Will RF Interfere with other devices in my home?
The RF will not interfere with other wireless or RF devices in your house. It produces its own
unique RF signal that can only communicate with our RF Switch.
How many switches can you connect to a single hub?
You can connect up to 20 switches to a single hub.
To Next Page
Loading...
Need help?
General
