3
STOP! READ ALL INSTRUCTIONS IN THIS GUIDE BEFORE INSTALLING YOUR
QUIETCOOL SYSTEM
Read this guide before proceeding! The manufacturer is NOT responsible for faulty
installation or product damages caused through failure to fully read this guide BEFORE
attempting installation.
FCC Regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the part responsible for compliance could void the user's
authority to operate the equipment.
1. SYSTEM OVERVIEW
1-1 INTRODUCTION
Congratulations on the purchase of your new QuietCool RF Wireless Control!
The QuietCool Whole House Fan RF Wireless Control is the simplest way to control your
QuietCool Advanced Whole House Fan from anywhere in your home!
The QuietCool RF Wireless Control allows users to set the length of time that the fan will run
and set the desired speed level.
1-2 Features
• Control your QuietCool from anywhere in your home
• Set countdown time for each QuietCool in your home (up to 12 hours)
• Adjust speed setting for each multi-speed QuietCool
• Pair up to 20 switches to each Hub
• Surface mount wall switch that can be removed and used from anywhere in the home
1-3 Key Specifications
IT-RFHUB-01 (Hub):
Voltage: 120V
Frequency: 60Hz
Motor load: 1HP, 735W (Max)
IT-RFSWITCH-01 (Switch):
Voltage: 3VDC (2 AAA batteries)
Battery Standby Current: ≤10uA
RF working distance: 100ft (no obstructions)
To Next Page
Loading...
Need help?
General
