OWNER’S MANUAL
Features And Functions 3
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the
RadioShack 6-in-1 Easy Setup Voice Remote and
then refer to the “Key Chart” (starting on the right)
to learn how they function.
To find out what type of devices can be controlled
by each device key after programming, see the
“Device Table” on page 5.
KEY CHART
Press a Device Key once to
select a desired home
entertainment device to
control (e.g., DVD).
Press POWER to turn a
selected device on or off.
Press (Light) to turn the
backlight on or off
In the CBL/SAT mode, press
PAGE+ or PAGE– to page up
or down through channels in
the program guide.
Use the navigation keys as
follows:
Press MENU to display the
your device's main menu.
Press GUIDE to display your
device's program guide, or
setup or program menu.
Press INFO to display the
current channel and
program information.
Press EXIT to exit from your
device's guide or menu.
Use the cursor keys (
S,X,
T,or W) to navigate
through the program guide
and menu screens.
In the AUD mode, press
S(or T) to raise (or
lower) rear channel volume
or navigate through menus
and press
Wor X to
balance audio left (or right).
Press OK to choose options
from your device's menu or
guide.
After programming, press
M1 or M2 once to run a
macro (see “Using Macros”
on page 8).
Press SLEEP to turn on the
sleep function. See “Setting
the Sleep Timer” on page 8.
RS 6in1 Easy Setup Owners Manual.fm Page 3 Wednesday, December 15, 2004 10:31 AM
To Next Page
Loading...
Need help?
General
