Radio Shack TRS-80 DT-1 User Manual

DI'-l
---------- TRS-aO ®
2/ setting Up the DI'-l
Owner' s Manual
Before connecting the ur--l to an AC power source, he sure
the Terminal and aIl peripherals are OFF.
The AC PCMer COrd exi ts from the rear of the Terminal.
COnnect it and aIl peripherals to an appropriate power
source. (Although not required, a device such as the
Automatic Power COntrol 1er (Radio Shack catalog Number
26-1429) could prove to he beth helpful and convenient.)
PCMer requirerœnts for aIl Radio Shack products are
sPecified on the units and in the owner's ma.nuals (see
SPecifications) •
You can connect the ur--l to a Host COmputer System directl y
(via a cable), or through the telephone lines (via a nodem).
Connecting the DI'-l to a TRS-8iJ
The TRS-8~ DI'-l can comnunicate wi th a var iety of Host
computers, including the TRS-8~ M::xiel 16, f.bdel II, M::xiel l,
and M::xiel III.
Tc use a TRS-8~ COmputer as a Host corrputer, you' Il need the
proper connection cable. Table l describes the cables Radio
Shack provides which can he used to connect a TRS-8~ to the
ur--l.
---------lIadle/haell---------
- 13 -

Radio Shack TRS-80 DT-1 Specifications

General

Brand	Radio Shack
Model	TRS-80 DT-1
Category	Desktop
Language	English