Radio Shack TRS-80 DT-1 User Manual

___ DI'_-l TRS-aO ®
Owner' s Manual
Establishing DT-l Input/OUtput Paraœters (-set-up-)
Before using the DT-l wi th a Host System and related
per ipherals (such as a Printer), you' Il have to be sure the
Terminal is using the appropriate Input/output <riO)
pararœters.
Fbr instance, before the DT-l can begin comnunicating wi th a
Host, you must be sure the Terminal and Host baud rates are
the sarœ. Or, you rnay want to usé the DT-l' s Reverse Video
feature where black letters are displayed on a white SCreen
instead of the typical white on black.
Unlike ma.ny other Terminals which have mechanical DIP
switches which you IIDlst set, the DT-I uses software-
selectable " sw itches" which are' rrore convenient and rrore
efficient than rœchanical swi tches.
The DT-I software switches allow you to rranipulate the:
Terminating Character.
Emulation M:lde.
Reverse Video.
Data Terminal Ready.
Data set Ready.
Data Carrier Detect.
Odd or Even Pari ty .
Parity select.
Word Length.
Baud Rate.
Autorratic Line Feed.
Autorratic Wrap-Around.
Full- or Half-Duplex.
cursor select.
To set the r/o pararœters (or to see what the current
settings are), press the key-cornbination of:
<CTRL> <SHIFI'> <ENTER>
----------lIadle/haell---------
- 23 -

Radio Shack TRS-80 DT-1 Specifications

General

Brand	Radio Shack
Model	TRS-80 DT-1
Category	Desktop
Language	English