28
• Select respective entry and press key, tare value edit box is
displayed.
• Enter tare value, to do it press
and keys:
Press to select digit that is to be edited.
Press to set digit value, 0 - 9 .
• Press key to confirm, <tArE 0> window is displayed.
• Now press
key to go to the home screen.
13.7.2. Selecting Tare Value from the Weighing Device Memory
• Enter <P2.rEAd / 2.7.tArn> submenu, name of tare no. 1 from tares
database is displayed (<tArE 0>), to select a different record press
key.
• To set the selected tare press
key.
• The set tare value is displayed with minus sign, Net symbol is shown in
the upper-left corner of the screen:
The tare value acquired from the weighing device memory is
not remembered upon the weighing device restart.
13.8. Last Digit
Function designed to disable display of the last weighing indication digit, this
results with less accurate measurement.
Procedure:
• Enter <P2.rEAd / 2.8.LdiG> submenu.
• Press
key, available values are displayed successively one by one:
ALAS
Select to make the last digit always on.
nEur
Select to make the last digit always off.
To Next Page
Loading...
Need help?
General
