12
Water ONE Zone:
Press the MANUAL WATERING button.
Press
+
or
–
to select any ONE Zone; then
press NEXT.
Press
+
or
–
to set the desired Run Time; then
press NEXT to begin watering.
During Manual Watering:
Press
+
or
–
to adjust watering Run Time
remaining for the active Zone as desired (reducing
to 0 minutes will stop Manual Watering).
Press NEXT or OFF to stop the remaining
Manual Watering cycle (if OFF is pressed, then
press AUTO to resume normal operation).
Additional Features
Water Now
Start watering immediately for ALL Zones or for
any ONE Zone.
Water ALL Zones:
Press the MANUAL WATERING button.
ALL Zones appears as the default selection;
press NEXT to continue.
Press
+
or
–
to set the desired Run Time; then
press NEXT to begin watering.
During Manual Watering:
Press
+
or
–
to adjust watering Run Time
remaining for the active Zone as desired.
Press NEXT to cancel watering for the active
Zone and advance to the next Zone in the cycle.
Press OFF to stop the remaining Manual
Watering cycle; then press AUTO to resume
normal operation.
MIN
MIN
ALL
ZONES
RUN
TIME
MIN
MIN
ZONE
RUN
TIME