Program mode
52 / 107
step info/button instructions
18 Choose the required core temperature.
19 Press the button.
20
Use the selection button to set “Prog/Clean |
Start” to save the program.
- Activate the “Prog/Clean | Start” button for programming again if it has gone out.
- If you would like to keep the same cooking mode in the next program step, choose another
cooking mode briefly in order to be able to start the next program step.
- Start a program with preheat (turn the selection button for cooking time anti-clockwise as far as it
will go).
- When you have occupied the maximum number of steps, “----” will appear on the display. Quit
by pressing “Prog/Clean | Start”.
- Set times or temperatures are fixed after 10 seconds. To change the settings later, turn
the selection button to the zero setting first (at the top) and then adjust the required time or
temperature.
To Next Page
Loading...
Need help?
General